Section 219.112  Incorporations by Reference

The following materials are incorporated by reference and do not contain any subsequent additions or amendments:

a)         American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-9555:

1)         ASTM D2879-86

2)         ASTM D323-82

3)         ASTM D86-82

4)         ASTM D369-69 (1971)

5)         ASTM D396-69

6)         ASTM D2880-71

7)         ASTM D975-68

8)         ASTM D3925-81 (1985)

9)         ASTM E300-86

10)         ASTM D1475-85

11)         ASTM D2369-87

12)         ASTM D3792-86

13)         ASTM D4017-81 (1987)

14)         ASTM D4457-85

15)         ASTM D2697-86

16)         ASTM D3980-87

17)         ASTM E180-85

18)         ASTM D2372-85

19)         ASTM D97-66

20)        ASTM E168-87 (1977)

21)        ASTM E169-87

22)        ASTM E260-91

23)        ASTM D2504-83

24)        ASTM D2382-83

25)        ASTM D323-82 (approved 1982)

b)         Standard Industrial Classification Manual, published by Executive Office of the President, Office of Management and Budget, Washington, D.C., 1987.

c)         American Petroleum Institute Bulletin 2517, "Evaporation Loss From Floating Roof Tanks", Second ed., February 1980.

d)         40 CFR Part 60 (July 1, 1991).

e)         40 CFR Part 61 (July 1,1991).

f)          40 CFR Part 50 (July 1,1991).

g)         40 CFR Part 51 (July 1,1991) and 40 CFR Part 51, Appendix M, Methods 204-204F (July 1, 1999).

h)         40 CFR Part 52 (July 1,1991).

i)          40 CFR Part 80 (July 1, 1991) and 40 CFR Part 80 Appendixes D, E, and F (July 1, 1993).

j)          "A Guide for Surface Coating Calculation", July 1986, United States Environmental Protection Agency, Washington, D.C., EPA-340/1-86-016.

k)         "Procedures for Certifying Quantity of Volatile Organic Compounds Emitted by Paint, Ink and Other Coating", (revised June 1986), United States Environmental Protection Agency, Washington D.C., EPA-450/3-84-019.

l)          "A Guide for Graphic Arts Calculations", August 1988, United States Environmental Protection Agency, Washington D.C., EPA-340/1-88-003.

m)        "Protocol for Determining the Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations", December 1988, United States Environmental Protection Agency, Washington D.C., EPA-450/3-88-018.

n)         "Control of Volatile Organic Emissions from Manufacturing of Synthesized Pharmaceutical Products", December 1978, United States Environmental Protection Agency, Washington, D.C., EPA-450/2-78-029.

o)         "Control of Volatile Organic Compound Leaks from Gasoline Tank Trucks and Vapor Collection Systems", December 1978, Appendix B, United States Environmental Protection Agency, Washington, D.C., EPA-450/2-78-051.

p)         "Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners", September 1982, United States Environmental Protection Agency, Washington, D.C., EPA-450/3-82-009.

q)         "APTI Course SI417 Controlling Volatile Organic Compound Emissions from Leaking Process Equipment", 1982, United States Environmental Protection Agency, Washington, D.C., EPA-450/2-82-015.

r)          "Portable Instrument User's Manual for Monitoring VOM Sources", June 1986, United States Environmental Protection Agency, Washington, D.C., EPA-340/1-86-015.

s)         "Protocols for Generating Unit-Specific Emission Estimates for Equipment Leaks of VOM and VHAP", October 1988, United States Environmental Protection Agency, Washington, D.C., EPA-450/3-88-010.

t)          "Petroleum Refinery Enforcement Manual", March 1980, United States Environmental Protection Agency, Washington, D.C., EPA-340/1-80-008.

u)         "Inspection Manual for Control of Volatile Organic Emissions from Gasoline Marketing Operations:  Appendix D", 1980, United States Environmental Protection Agency, Washington, D.C., EPA-340/1-80-012.

v)         "Control of Hydrocarbons from Tank Truck Gasoline Loading Terminals:  Appendix A", December 1977, United States Environmental Protection Agency, Washington, D.C., EPA-450/2-77-026.

w)        "Technical Guidance-Stage II Vapor Recovery Systems for Control of Vehicle Refueling Emissions at Gasoline Dispensing Facilities", November 1991, United States Environmental Protection Agency, Washington, D.C., EPA-450/3-91-022b.

x)         California Air Resources Board, Compliance Division.  Compliance Assistance Program:  Gasoline Marketing and Distribution:  Gasoline Facilities Phase I & II (October 1988, rev. November 1993) (CARB Manual).

y)         "Guidelines for Determining Capture Efficiency," January 1995, Office of Air Quality Planning and Standards, United States Environmental Protection Agency, Research Triangle Park, NC.

z)         Memorandum "Revised Capture Efficiency Guidance for Control of Volatile Organic Compound Emissions," February 1995, John S. Seitz, Director, Office of Air Quality Planning and Standards, United States Environmental Protection Agency.

(Source:  Amended at 30 Ill. Reg. 9799, effective May 15, 2006)