Section 307.2006  Carpet Finishing

a)         Applicability.  This Section applies to discharges resulting from the following types of textile mills:  carpet mills, which may include any or all of the following unit operations:  bleaching, scouring, carbonizing, fulling, dyeing, printing, resin treatment, waterproofing, flameproofing, soil repellency, looping, and backing with foamed and unfoamed latex and jute.  Carpet backing without other carpet manufacturing operations is included in Subpart C of this Part.

b)         Specialized definitions.  The Board incorporates by reference 40 CFR 410.61 (2003).  This incorporation includes no later amendments or editions.

c)         Existing sources.

1)         The Board incorporates by reference 40 CFR 410.64 (2003).  This incorporation includes no later amendments or editions.

2)         No person subject to the pretreatment standards incorporated by reference in subsection(c)(1) of this Section may cause, threaten, or allow the discharge of any contaminant to a POTW in violation of such standards.

d)         New sources.

1)         The Board incorporates by reference 40 CFR 410.66 (2003).  This  incorporation includes no later amendments or editions.

2)         No person subject to the pretreatment standards incorporated by reference in subsection (d)(1) of this Section may cause, threaten, or allow the discharge of any contaminant to a POTW in violation of such standards.

3)         "New source" means any building, structure, facility, or installation the construction of which commenced after October 10, 1979.

(Source:  Amended at 28 Ill. Reg. 3076, effective February 6, 2004)