Section 176.460 Pre-'74 and Heating Oil USTs
USTs not in operation at any time after January 1, 1974
(commonly referred to as "pre-'74 USTs"), and non-farm and
non-residential heating oil USTs for consumptive use on the premises where
stored, remain classified as USTs and require a permit to be abandoned-in-place
or removed and are subject to all other applicable UST requirements, except for
those requirements specifically exempted by this Section or by Section
176.440.
a) Pursuant
to Sections 2(3)(f) and 4(b)(1)(A) of the Gasoline Storage Act, pre-'74 USTs
are not required to be registered and need not be removed, unless the OSFM has
determined that a release from the USTs poses a current or potential threat to
human health and the environment.
b) In
accordance with Section 57.5(g) of the Illinois Environmental Protection Act
[415 ILCS 5/57.5(g)] and Section 4 of the Gasoline Storage Act, a heating oil
UST for consumptive use on the premises where stored, regardless of when last
in operation, is not required to be removed unless OSFM has determined that a
release from the UST poses a current or potential threat to human health and
the environment. However, the UST is subject to the notification requirements,
as well as compliance with all other applicable Sections of 41 Ill. Adm. Code
175 and this Part.
c) Heating
oil USTs installed prior to April 1, 1995 are not required to meet the upgrade
requirements for corrosion protection, spill and overfill prevention, and
release detection in 41 Ill. Adm. Code 174 and 175 and this Part. Heating oil
USTs installed after April 1, 1995 must meet all current upgrade requirements
outlined in 41 Ill. Adm. Code 174 and 175 and this Part, including permitting.
d) If
any pre-'74 tank, heating oil or otherwise, discovered during any activity is
found to be damaged or is damaged at the time of discovery, it shall be
removed. No structure shall be erected over pre-'74 tanks, heating oil or
otherwise, and they must be removed by an OSFM-licensed contractor. All
applicable permits apply.