TITLE 35: ENVIRONMENTAL PROTECTION
SUBTITLE B: AIR POLLUTION
CHAPTER I: POLLUTION CONTROL BOARD
SUBCHAPTER c: EMISSIONS STANDARDS AND LIMITATIONS FOR STATIONARY SOURCES
PART 215 ORGANIC MATERIAL EMISSION STANDARDS AND LIMITATIONS
SECTION 215.521 DEFINITIONS


 

Section 215.521  Definitions

 

In addition to the definitions of 35 Ill. Adm. Code 211, the following definitions apply to this Subpart:  

 

            "Air Oxidation Process":  any unit process including ammoxidation and oxychlorination which uses air or a combination of air and oxygen as an oxidant in combination with one or more organic reactants to produce one or more organic compounds.

 

            "Cost Effectiveness":  the annual expense for cost of control of a given process stream divided by the reduction in emissions of organic material of that stream.

 

            "Flow (F)":  Vent stream flowrate (scm/min) at a standard temperature of 20C.

 

            "Full Operating Flowrate":  Maximum operating capacity of the facility.

 

            "Hourly Emissions (E)":  Hourly emissions reported in kg/hr measured at full operating flowrate.

 

            "Net Heating Value (H)":  Vent stream net heating value (MJ/scm), where the net enthalpy per mole of offgas is based on combustion at 25º C and 760 mm Hg, but the standard temperature for determining the volume corresponding to one mole is 20º C, as in the definition of "Flow."

 

            "Process vent Stream":  an emission stream resulting from an air oxidation process.

 

            "Total Resource Effectiveness Index (TRE)":  Cost effectiveness in dollars per megagram of controlling any gaseous stream vented to the atmosphere from an air oxidation process divided by $1600/Mg, using the criteria and methods set forth in this Subpart and Appendices E and F.

 

(Source:  Added at 11 Ill. Reg. 20829, effective December 14, 1987)