TITLE 35: ENVIRONMENTAL PROTECTION
SUBTITLE B: AIR POLLUTION
CHAPTER I: POLLUTION CONTROL BOARD
SUBCHAPTER c: EMISSIONS STANDARDS AND LIMITATIONS FOR STATIONARY SOURCES
PART 219 ORGANIC MATERIAL EMISSION STANDARDS AND LIMITATIONS FOR THE METRO EAST AREA
SECTION 219.206 SOLIDS BASIS CALCULATION

 

Section 219.206   Solids Basis Calculation

 

Limitations in terms of kg (lbs) of VOM emissions per 1 (gal) of solids as applied at each coating applicator shall be determined by the following equation:

 

 

where:

 

S

=

The limitation on VOM emissions in terms of kg VOM/l (lbs VOM/gal) of solids;

 

 

 

C

=

The limitation on VOM emissions in terms of kg/l (lbs/gal) of coating (minus water and any compounds which are specifically excluded from the definition of VOM) specified in Section 219.204;

 

 

 

D

=

The density of VOM in the coating. For the purposes of calculating S, the density is 0.882 kg VOM/l VOM (7.36 lbs VOM/gal VOM).

 

(Source:  Amended at 17 Ill. Reg. 16918, effective September 27, 1993)