TITLE 35: ENVIRONMENTAL PROTECTION
SUBTITLE B: AIR POLLUTION
CHAPTER II: ENVIRONMENTAL PROTECTION AGENCY
PART 276 PROCEDURES TO BE FOLLOWED IN THE PERFORMANCE OF INSPECTIONS OF MOTOR VEHICLE EMISSIONS
SECTION 276.601 STEADY-STATE IDLE TEST EQUIPMENT MAINTENANCE


 

Section 276.601  Steady-State Idle Test Equipment Maintenance

 

All operators of exhaust gas analyzers shall conduct a preventive maintenance and quality control program consisting of the following elements:

 

a)         an HC hang-up check conducted prior to each test and after the last test of the day; HC hang-up shall not exceed 20 ppm HC prior to any test;

 

b)         visual inspection of all equipment prior to the first test of the day;

 

c)         performance of analyzer preventative maintenance (e.g., filter replacement, inspection and cleaning of probes, sample lines, water traps, etc.) according to manufacturer's recommended schedules and as needed; and

 

d)         all calibration and operating procedures specified in Section 276.602.

 

(Source:  Amended at 22 Ill. Reg. 18867, effective September 28, 1998)