Section 739.151  Notification

a)         Identification Numbers.  A used oil processor or re-refiner that has not previously complied with the notification requirements of RCRA section 3010 must obtain a USEPA identification number pursuant to RCRA section 3010 and an Illinois special waste identification number.

b)         Mechanics of Notification

1)         A used oil processor or re-refiner that has not received a USEPA identification number may obtain one by notifying the Agency of its used oil activity by submitting either of the following:

A)        A completed Notification of RCRA Subtitle C Activities (Site Identification Form) (USEPA Form 8700-12) to the Agency; or

BOARD NOTE:  USEPA Form 8700-12 is available from the Agency, Bureau of Land (217-782-6762).  It is also available on-line for download in PDF file format:  www.epa.gov/‌hwgenerators/‌instructions-and-form-hazardous-waste-generators-transporters-and-treatment-storage-and.

B)        A letter to the Agency requesting a USEPA identification number.  The letter should include the following information:

i)          The processor or re-refiner company name;

ii)         The owner of the processor or re-refiner company;

iii)        The mailing address for the processor or re-refiner;

iv)        The name and telephone number for the processor or re-refiner point of contact;

v)         The type of transport activity (i.e., transport only, transport and transfer facility, or transfer facility only);

vi)        The location of all transfer facilities at which used oil is stored;

vii)       The name and telephone number for a contact at each transfer facility.

2)         A used oil processor or re-refiner that has not received an Illinois special waste identification number may obtain one by contacting the Agency at the following address:  Division of Land Pollution Control, Illinois EPA, 1021 North Grand Avenue, Springfield, Illinois 62794-9276 (217-782-6761).

(Source:  Amended at 43 Ill. Reg. 6101, effective May 2, 2019)