Section 739.162  Notification

a)         Identification Numbers.  A used oil burner that has not previously complied with the notification requirements of RCRA section 3010 must comply with these requirements and obtain a USEPA identification number pursuant to RCRA section 3010 and an Illinois special waste identification number.

b)         Mechanics of Notification.  A used oil burner that has not received a USEPA identification number may obtain one by notifying the Agency of its used oil activity by submitting either of the following:

1)         A completed Notification of RCRA Subtitle C Activities (Site Identification Form) (USEPA Form 8700-12) to the Agency; or

BOARD NOTE:  USEPA Form 8700-12 is available from the Agency, Bureau of Land (217-782-6762).  It is also available on-line for download in PDF file format:  www.epa.gov/‌hwgenerators/‌instructions-and-form-hazardous-waste-generators-transporters-and-treatment-storage-and.

2)         A letter to the Agency requesting a USEPA identification number.  The letter should include the following information:

A)        The burner company name;

B)        The owner of the burner company;

C)        The mailing address for the burner;

D)        The name and telephone number for the burner point of contact;

E)        The type of used oil activity; and

F)         The location of the burner facility.

c)         A used oil burner that has not previously obtained an Illinois special waste identification number may obtain one by contacting the Agency at the following address:  Division of Land Pollution Control, Illinois EPA, 1021 North Grand Avenue, Springfield, Illinois 62794-9276 (217-782-6761).

(Source:  Amended at 43 Ill. Reg. 6101, effective May 2, 2019)