TITLE 44: GOVERNMENT CONTRACTS, GRANTMAKING, PROCUREMENT AND PROPERTY MANAGEMENT
SUBTITLE B: SUPPLEMENTAL PROCUREMENT RULES
CHAPTER XXV: SECRETARY OF STATE
PART 2000 SECRETARY OF STATE STANDARD PROCUREMENT
SECTION 2000.2055 TYPES OF CONTRACTS


 

Section 2000.2055  Types of Contracts

 

a)         Scope

This Section contains descriptions of types of contracts and limitations as to when they should be utilized by the State in its procurements. Types of contracts not mentioned in this Section may also be utilized.

 

b)         Prohibition of Cost-Plus-a-Percentage-of-Cost Contracting

The cost-plus-a-percentage-of-cost contract is prohibited by Section 20-55 of the Illinois Procurement Code. This type of contracting may not be used alone or in conjunction with an authorized type of contract. A cost-plus-percentage-of-cost contract is one in which the vendor selects the supply or service on which the vendor's percentage is applied.

 

1)         A percentage mark-up from an agreed price list is not a cost-plus-a-percentage-of-cost contract.

 

2)         A percentage mark-up from the price of a supply or service selected by the State or another vendor under contract to the State is not a cost-plus-a-percentage-of-cost contract.

 

c)         Types of Fixed-Price Contracts

 

1)         Firm Fixed-Price Contract. A firm fixed-priced contract provides a price that is not subject to adjustment because of variations in the vendor's cost of performing the work specified in the contract.

 

2)         Fixed-Price Contract with Price Adjustment

 

A)        A fixed-price contract with price adjustment provides for variation in the contract price under special conditions defined in the contract, other than customary provisions authorizing price adjustments due to modifications to the work. The formula or other basis by which the adjustment in the vendor's price can be made shall be specified in the solicitation and the resulting contract. Adjustment allowed may be upward or downward only, or both upward and downward. Examples of conditions under which adjustments may be provided in fixed-price contracts are:

 

i)          changes in the vendor's labor agreement rates as applied to an industry or area (such as are frequently found in contracts for the purchase of coal);

 

ii)         changes due to rapid and substantial price fluctuations that can be related to an accepted index (such as contracts for gasoline, heating oils, and dental gold alloy); and

 

iii)        in requirement contracts, where a vendor is selected to provide all of the State's needs for the items specified in the contract, when a general price change applicable to all customers occurs, or when a general price change alters the base price (such as a change in a manufacturer's published price list or posted price to which a fixed discount is applied pursuant to the contract to determine the contract price).

 

B)        If the contract permits unilateral action by the vendor to bring about the condition under which a price increase may occur, the State shall have the right to reject the price increase and terminate without cost the future performance of the contract.

 

d)         Cost-Reimbursement Contracts

 

1)         Determination Prior to Use

 

A)        A cost-reimbursement type contract may be used only when the Procurement Officer determines in writing that such a contract is likely to be less costly to the State than any other type or that it is impracticable to obtain the items.

 

B)        Reimbursement of travel expenses in accordance with applicable travel control board regulations is authorized without further determinations.

 

2)         Cost Contract. A cost contract provides that the vendor will be reimbursed for allowable costs incurred in performing the contract, but will not receive a fee.

 

3)         Cost-Plus-Fixed-Fee Contract. This is a cost-reimbursement type contract that provides for payment to the vendor of an agreed fixed fee in addition to reimbursement of allowable incurred costs. The fee is established at the time of contract award and does not vary if the actual cost of contract performance is greater or less than the initial estimated cost established for such work. Thus, the fee is fixed but not the contract amount because the final contract amount will depend on the allowable costs reimbursed. The fee is subject to adjustment only if the contract is modified to provide for an increase or decrease in the scope of work specified in the contract.

 

4)         Cost Incentive Contracts

 

A)        General. A cost-incentive type of contract provides for the reimbursement to the vendor of allowable costs incurred up to the ceiling amount and establishes a formula whereby the vendor is rewarded for performing at less than target cost (that is, the parties' agreed best estimate of the cost of performing the contract will vary inversely with the actual, allowable costs of performance and consequently is dependent on how effectively the vendor controls cost in the performance of the contract).

 

B)        Fixed-Price Cost-Incentive Contract. In a fixed-price cost-incentive contract, the parties establish at the outset a target cost, a target profit (that is, the profit that will be paid if the actual cost of performance equals the target cost), a formula that provides a percentage increase or decrease of the target profit depending on whether the actual cost of performance is less than or exceeds the target cost, and a ceiling price. After performance of the contract, the actual cost of performance is arrived at based on the total incurred allowable costs as provided in the contract. The final contract price is then established in accordance with the formula using the actual cost of performance. The final contract price may not exceed the ceiling price. The vendor is obligated to complete performance of the contract, and, if actual costs exceed the ceiling price, the vendor suffers a loss.

 

C)        Cost-Reimbursement Contract with Cost-Incentive Fee. In a cost-reimbursement contract with cost-incentive fee, the parties establish at the outset a target cost; a target fee; a formula for increase or decrease of fee depending on whether actual cost of performance is less than or exceeds the target cost, with maximum and minimum fee limitations; and a cost ceiling that represents the maximum amount that the State is obligated to reimburse the vendor. The vendor continues performance until the work is complete or costs reach the ceiling specified in the contract, including any modification thereof, whichever first occurs. After performance is complete or costs reach the ceiling, the total incurred, allowable costs reimbursed as provided in the contract are applied to the formula to establish the incentive fee payable to the vendor.

 

e)         Performance Incentive Contracts

In a performance incentive contract, the parties establish at the outset a pricing basis for the contract, performance goals, and a formula that varies the profit or the fee if the specified performance goals are exceeded or not met. For example, early completion may entitle the vendor to a bonus, while late completion may entitle the State to a price decrease.

 

f)         Time and Materials Contracts; Labor Hour Contracts

Time and materials contracts provide an agreed basis for payment for materials supplied and labor performed. Labor hour contracts provide only for the payment of labor performed. Such contracts shall, to the extent possible, contain a stated ceiling or an estimate that shall not be exceeded without prior State approval.

 

g)         Definite Quantity and Indefinite Quantity Contracts

 

1)         Definite Quantity. A definite quantity contract is a fixed-price contract that provides for delivery of a specified quantity of supplies or services either at specified times or when ordered.

 

2)         Indefinite Quantity. An indefinite quantity contract is a contract for an indefinite amount of supplies or services to be furnished at specified times, or as ordered, that establishes unit prices of a fixed-price type. Generally an approximate quantity or the best information available as to quantity is stated in the solicitation. The contract may provide a minimum quantity the State is obligated to order and may also provide for a maximum quantity provision that limits the State's obligation to order.

 

3)         Requirements Contracts. A requirements contract is an indefinite quantity contract for supplies or services that specifically obligates the State to order all the actual requirements of designated State agencies during a specified period of time.

 

h)         Leases

A lease is a contract for the use of supplies or real property under which title will not pass to the State at any time, except pursuant to an option to purchase.

 

i)          Recovery Contracts

Contracts may provide for payment to the vendor of a percentage of the amount the vendor recovers or collects on behalf of the State. The percentage may be fixed or may vary depending on amount of recovery or other factors, and the percentage may be paired with a fixed price or cost reimbursement method.

 

j)          Option Provisions

 

1)         Contract Provision. When a contract is to contain an option for renewal, extension, or purchase, notice of such provision shall be included in the solicitation. These options may be exercised without taking other procurement action when the option is established for exercise at the State's option.

 

2)         Lease with Purchase Option. A purchase option in a lease may be exercised only if the lease containing the purchase option was awarded under competitive sealed bidding or competitive sealed proposals, the leased supply or facility is the only supply or facility that can meet the State's requirements, the purchase option price is less than the small purchase limit or emergency conditions exist.

 

k)         State Produced Supplies and Services

Notwithstanding any provision in any contract, supplies or services available from the State's own programs, such as Correctional Industries, may be ordered without violating any contract.

 

l)          Extraordinary Quantities

Notwithstanding any provision in any contract, the State reserves the right to take bids separately if a particular quantity requirement arises that exceeds the State's normal needs or ordering requirements.

 

m)        Energy Conservation

The CPO may authorize an IFB, RFP or sole source negotiation for energy conservation measures whereby the State would make payment based on utility cost savings. Such contract shall require a clearly defined baseline of energy usage and method of measuring cost savings taking into account at least differing weather conditions, changes in facility usage and cost of energy.

 

n)         Sale of Advertising in State Publications

 

1)         Pursuant to Section 20-110 of the Code, a Procurement Officer may sell ads or advertising space in publications issued by the Secretary of State.

 

2)         These arrangements shall be made pursuant to specifications included in an IFB or, if appropriate, an RFP.

 

3)         The advertising in, or authorized use of, State publications shall be appropriate to the type of publication and the program operations of the agency.

 

4)         This procedure is authorized in conjunction with, for example, publications that promote literacy, organ donation, senior services and the State Library. The Secretary of State and not a designee must concur in writing to accept advertising from a person the agency regulates.

 

5)         Proceeds from the sale of the advertisements shall be paid as stated in the IFB or RFP, including, but not limited to, the following:

 

A)        to the General Revenue Fund;

 

B)        to a special fund authorized to receive the proceeds;

 

C)        as free or additional copies; or

 

D)        directly to the printer by the advertiser.