TITLE 68: PROFESSIONS AND OCCUPATIONS
CHAPTER VII: DEPARTMENT OF PROFESSIONAL REGULATION
SUBCHAPTER b: PROFESSIONS AND OCCUPATIONS
PART 1252 PROFESSIONAL GEOLOGIST LICENSING ACT
SECTION 1252.APPENDIX A GEOLOGIST SEAL REQUIREMENTS



Section 1252.APPENDIX A   Geologist Seal Requirements

 

a)         In accordance with Section 60 of the Act, each licensee shall obtain, at his/her own expense, a seal or rubber stamp, 1¾ inches in diameter.  The seal or stamp shall consist of concentric circles between which shall appear in capital letters "ILLINOIS" in the lower portion of the seal and "LICENSED PROFESSIONAL GEOLOGIST" in the upper portion of the seal.  Within the inner circle of the seal shall appear the name of the licensee and the individual's license number.

 

b)         The following is a suggested facsimile of the design and lettering of the seal:

 

 

 

 

 

 

 

 

 

 

 

 

(Source:  Added at 22 Ill. Reg. 15349, effective August 10, 1998)