Section 554.211  Revision of Permits

A permit shall not be altered or revised except by the Permit Office.

a)         The Permit Office may issue revisions to permits:

1)         to correct errors attributed to the issuing office;

2)         at the request of the permittee before the move has been started:

A)        to alter routes or destinations;

B)        to correct or increase sizes or weights;

C)        to substitute a vehicle used to transport a load;

D)        to adjust weights as outlined in Section 554.608; or

3)         due to emergency or exceptional conditions beyond the control of or outside the normal scope of knowledge of the permittee.

b)         It is the responsibility of the permittee to ensure accuracy of the application.  Only one revision per permit will be issued.

c)         Consistent with the provisions of this Section, revisions will not be issued:

1)         For Permits for Repeated Moves of Like Objects because applications for such moves have been given considerable advance planning;

2)         To change the name of the permittee;

3)         To change the origin or first route of the move except when entering from the same State line;

4)         To alter the description of the load, including the make, model number and/or serial number;

5)         To revise a permit that has been violated;

6)         To add to scale designation (weigh station) within route; or

7)         To change the type of permit.

(Source:  Amended at 36 Ill. Reg. 13254, effective August 1, 2012)