(415 ILCS 5/21.5) (from Ch. 111 1/2, par. 1021.5)

Sec. 21.5. Toxic packaging reduction.

(a) For the purposes of this Section, the following terms have the meanings ascribed to them in this subsection:

"Distributor" means any person, firm, or corporation that takes title to goods purchased for resale.

"Package" means a container providing a direct means of marketing, protecting, or handling a product, and includes a product unit package, an intermediate package, or a shipping container as defined by ASTM D996. "Package" shall also include such unsealed consumer product receptacles as carrying cases, crates, cups, pails, rigid foil and other trays, wrappers and wrapping films, bags, and tubs.

"Packaging component" means any individual assembled part of a package including, but not limited to, any interior or exterior blocking, bracing, cushioning, weatherproofing, coatings, closure, ink, and labeling; except that coatings shall not include a thin tin layer applied to base steel or sheet steel during manufacturing of the steel or package.

(b) Beginning July 1, 1994, no package or packaging component may be offered for sale or promotional purposes in this State, by its manufacturer or distributor, if the package itself or any packaging component includes any ink, dye, pigment, adhesive, stabilizer, or other additive that contains lead, cadmium, mercury or hexavalent chromium that has been intentionally introduced during manufacturing or distribution.

(c) Beginning July 1, 1994, no product may be offered for sale or for promotional purposes in this State by its manufacturer or distributor in Illinois in a package that includes, in the package itself or in any of its packaging components, any ink, dye, pigment, adhesive, stabilizer, or other additive that contains lead, cadmium, mercury or hexavalent chromium that has been intentionally introduced during manufacturing or distribution.

(d) No package or packaging component, and no product in a package, may be offered for sale or promotional purposes in this State if the sum of the concentration levels of lead, cadmium, mercury, or hexavalent chromium present in the package or packaging component, but not intentionally introduced by the manufacturer or distributor, exceeds the following limits:

(1) 600 parts per million by weight (0.06%) beginning July 1, 1994.

(2) 250 parts per million by weight (0.025%) beginning July 1, 1995.

(3) 100 parts per million by weight (0.01%) beginning July 1, 1996.

(e) The following packages and packaging components are not subject to this Section:

(1) Those packages or packaging components with a code indicating a date of manufacture before July 1, 1994.

(2) Those packages or packaging components for which an exemption has been granted by the Agency under subsection (f).

(3) Until July 1, 1998, packages and packaging components that would not exceed the maximum contaminant levels set forth in subsection (d) of this Section but for the addition of post consumer materials.

(4) Those packages or packaging components used to contain wine or distilled spirits that have been bottled before July 1, 1994.

(5) Packaging components, including but not limited to strapping, seals, fasteners, and other industrial packaging components intended to protect, secure, close, unitize or provide pilferage protection for any product destined for commercial use.

(6) Those packages used in transporting, protecting, safe handling or functioning of radiographic film.

(f) The Agency may grant an exemption from the requirements of this Section for a package or packaging component to which lead, cadmium, mercury, or hexavalent chromium has been added in the manufacturing, forming, printing, or distribution process in order to comply with health or safety requirements of federal law or because there is not a feasible alternative. These exemptions shall be granted, upon application of the manufacturer of the package or packaging component, for a period of 2 years and are renewable for periods of 2 years. If the Agency denies a request for exemption, or fails to take final action on a request within 180 days, the applicant may seek review from the Board in the same manner as in the case of a permit denial. Any other party to the Agency proceeding may seek review in the manner provided in subsection (c) of Section 40.

For the purposes of this subsection, a use for which there is no feasible alternative is one in which the regulated substance is essential to the protection, safe handling, or function of the package's contents.

The Agency may enter into reciprocal agreements with other states that have adopted similar restrictions on toxic packaging and may accept exemptions to those restrictions granted by such states. Prior to taking such action, the Agency shall provide for public notice in the Environmental Register and for a 30-day comment period.

(g) Beginning July 1, 1994, a certificate of compliance stating that a package or packaging component is in compliance with the requirements of this Section shall be furnished by its manufacturer or supplier to its distributor, or shall be maintained by the manufacturer in Illinois if the manufacturer is also the distributor. If compliance is achieved only under the exemption provided in subdivision (e)(2) or (e)(3), the certificate shall state the specific basis upon which the exemption is claimed. The certificate of compliance shall be signed by an authorized official of the manufacturer or supplier. The certificate can be for the entire class, type, or category of packaging or a particular product regulated under this Act, and a certificate need not be provided or maintained for each individual package, packaging component, or packaging for a product. The manufacturer or distributor in Illinois shall retain the certificate of compliance for as long as the package or packaging component is in use. A copy of the certificate of compliance shall be kept on file by the manufacturer or supplier of the package or packaging component. Certificates of compliance, or copies thereof, shall be furnished to the Agency upon its request and to members of the public in accordance with subsection (i).

If the manufacturer or supplier of the package or packaging component reformulates or creates a new package or packaging component, the manufacturer or supplier shall provide an amended or new certificate of compliance for the reformulated or new package or packaging component.

(h) (Blank.)

(i) Any request from a member of the public for any certificate of compliance from the manufacturer or supplier of a package or packaging component shall be:

(1) made in writing and transmitted by registered mail with a copy provided to the Agency;

(2) specific as to the package or packaging component information requested; and

(3) responded to by the manufacturer or supplier within 60 days.

(j) The provisions of this Section shall not apply to any glass or ceramic product used as packaging that is intended to be reusable or refillable, and where the lead and cadmium from the product do not exceed the Toxicity Characteristic Leachability Procedures of leachability of lead and cadmium as set forth by the U.S. Environmental Protection Agency.

(Source: P.A. 92-574, eff. 6-26-02.)