Section 218.112  Incorporations by Reference

The following materials are incorporated by reference and do not contain any subsequent additions or amendments.

a)         American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken PA 19428-9555:

1)         ASTM D 2879-86

2)         ASTM D 323-08

3)         ASTM D 86-82

4)         ASTM D 369-69 (1971)

5)         ASTM D 396-69

6)         ASTM D 2880-71

7)         ASTM D 975-68

8)         ASTM D 3925-81 (1985)

9)         ASTM E 300-86

10)         ASTM D 1475-85

11)         ASTM D 2369-87

12)         ASTM D 3792-86

13)         ASTM D 4017-81 (1987)

14)         ASTM D 4457-85

15)         ASTM D 2697-86

16)         ASTM D 3980-87

17)         ASTM E 180-85

18)         ASTM D 2372-85

19)         ASTM D 97-66

20)         ASTM E 168-67 (1977)

21)         ASTM E 169-87

22)         ASTM E 260-91

23)         ASTM D 2504-83

24)         ASTM D 2382-83

25)         ASTM D 2099-00

b)       Standard Industrial Classification Manual, published by Executive Office of the President, Office of Management and Budget, Washington, D.C., 1987.

c)       American Petroleum Institute Bulletin 2517, "Evaporation Loss From Floating Roof Tanks", Second ed., February 1980.

d)       40 CFR 60 (July 1, 1991) and 40 CFR 60, appendix A, Method 24 (57 FR 30654, July 10, 1992).

e)       40 CFR 61 (July 1, 1991).

f)       40 CFR 50 (July 1, 1991).

g)       40 CFR 51 (July 1, 1991) and 40 CFR 51, appendix M, Methods 204-204F (July 1, 1999).

h)       40 CFR 52 (July 1, 1991).

i)        "A Guide for Surface Coating Calculation", July 1986, United States Environmental Protection Agency, Washington, D.C., EPA-340/1-86-016.

j)        "Procedures for Certifying Quantity of Volatile Organic Compounds Emitted by Paint, Ink and Other Coating" (revised June 1986), United States Environmental Protection Agency, Washington, D.C., EPA-450/3-84-019.

k)       "A Guide for Graphic Arts Calculations", August 1988, United States Environmental Protection Agency, Washington, D.C., EPA-340/1-88-003.

l)        "Protocol for Determining the Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations", December 1988, United States Environmental Protection Agency, Washington, D.C., EPA-450/3-88-018.

m)      "Control of Volatile Organic Emissions from Manufacturing of Synthesized Pharmaceutical Products", December 1978, United States Environmental Protection Agency, Washington, D.C., EPA-450/2-78-029.

n)       "Control of Volatile Organic Compound Leaks from Gasoline Tank Trucks and Vapor Collection Systems", December 1978, Appendix B, United States Environmental Protection Agency, Washington, D.C., EPA-450/2-78-051.

o)       "Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners", September 1982, United States Environmental Protection Agency, Washington, D.C., EPA-450/3-82-009.

p)       "APTI Course SI417 Controlling Volatile Organic Compound Emissions from Leaking Process Equipment", 1982, United States Environmental Protection Agency, Washington, D.C., EPA-450/2-82-015.

q)       "Portable Instrument User's Manual for Monitoring VOC Sources", June 1986, United States Environmental Protection Agency, Washington, D.C., EPA-340/1-86-015.

r)        "Protocols for Generating Unit-Specific Emission Estimates for Equipment Leaks of VOC and VHAP", October 1988, United States Environmental Protection Agency, Washington, D.C., EPA-450/3-88-010.

s)        "Petroleum Refinery Enforcement Manual", March 1980, United States Environmental Protection Agency, Washington, D.C., EPA-340/1-80-008.

t)         "Inspection Manual for Control of Volatile Organic Emissions from Gasoline Marketing Operations:  Appendix D", 1980, United States Environmental Protection Agency, Washington, D.C., EPA-340/1-80-012.

u)        "Control of Hydrocarbons from Tank Truck Gasoline Loading Terminals:  Appendix A", December 1977, United States Environmental Protection Agency, Washington, D.C., EPA-450/2-77-026.

v)        "Technical Guidance – Stage II Vapor Recovery Systems for Control of Vehicle Refueling Emissions at Gasoline Dispensing Facilities", November 1991, United States Environmental Protection Agency, Washington, D.C., EPA-450/3-91-022b.

w)       California Air Resources Board, Compliance Division.  Compliance Assistance Program:  Gasoline Marketing and Distribution:  Gasoline Facilities Phase I & II (October 1988, rev. November 1993) (CARB Manual).

x)        South Coast Air Quality Management District (SCAQMD), Applied Science & Technology Division, Laboratory Services Branch, SCAQMD Method 309-91, Determination of Static Volatile Emissions (February 1993).

y)        South Coast Air Quality Management District (SCAQMD), Applied Science & Technology Division, Laboratory Services Branch, SCAQMD Method 312-91, Determination of Percent Monomer in Polyester Resins (April 1996).

z)         "Guidelines for Determining Capture Efficiency", January 1995, Office of Air Quality Planning and Standards, United States Environmental Protection Agency, Research Triangle Park NC.

aa)       Memorandum "Revised Capture Efficiency Guidance for Control of Volatile Organic Compound Emissions", February 1995, John S. Seitz, Director, Office of Air Quality Planning and Standards, United States Environmental Protection Agency.

bb)       "Protocol for Determining the Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Primer-Surfacer and Topcoat Operations", September 2008, United States Environmental Protection Agency, Washington, D.C., EPA-453/R-08-002.

cc)        40 CFR 63, subpart PPPP, appendix A (2008).

dd)       46 CFR subchapter Q (2007).

ee)        46 CFR subchapter T (2008).

ff)        Petroleum Equipment Institute, "Recommended Practices for Installation and Testing of Vapor-Recovery Systems at Vehicle-Fueling Sites",  PEI/RP300-09 (2009).

(Source:  Amended at 38 Ill. Reg. 1032, effective December 23, 2013)