Section 219.444  Process Unit Turnarounds

a)         No owner or operator of a petroleum refinery shall cause or allow a refinery process unit turnaround except in compliance with an operating procedure as approved by the Agency.

b)         Unless a procedure was already on file with the Agency as part of an approved operating permit no later than November 1, 1979, the owner or operator of a petroleum refinery shall submit to the Agency for approval a detailed procedure for reducing emissions of volatile organic material during refinery process unit turnarounds from organic material with a vapor pressure of 10.34 kPa (1.5 psia) or greater at 294.3°K (70°F).  The Agency shall not approve the procedure unless it provides for:

1)         Depressurization of the refinery process unit or vessel to a flare, refinery fuel gas system, or other equipment or system of equal emission control, as approved by the Agency and approved by the USEPA as a SIP revision, until the internal pressure from the vessel or unit is less than 5.0 psig before allowing the vessel to be vented to the atmosphere;

2)         Recordkeeping of the following items:

A)        Each date that a refinery unit or vessel is shut down; and

B)        The total estimated quantity of volatile organic material emitted to the atmosphere and the duration of the emission in hours.