|
| | 10300SB0896sam001 | - 2 - | LRB103 03368 MXP 59613 a |
|
|
| 1 | | greater than 25 candlepower or its equivalent from a |
| 2 | | single lamp or single light-emitting diode (L.E.D.); |
| 3 | | (2) shall not be directed horizontally; |
| 4 | | (3) shall be so directed that no part of the beam will |
| 5 | | strike the level of the surface on which the motorcycle |
| 6 | | stands at a distance of more than 10 feet from the |
| 7 | | motorcycle; |
| 8 | | (4) shall be directed towards the ground; |
| 9 | | (5) shall not emit red or blue light; |
| 10 | | (6) shall not be: |
| 11 | | (A) blinking; |
| 12 | | (B) flashing; |
| 13 | | (C) oscillating; or |
| 14 | | (D) rotating; and |
| 15 | | (7) shall not be attached to the wheels of the |
| 16 | | motorcycle.
|
| 17 | | (Source: P.A. 99-242, eff. 8-3-15.) |
| 18 | | (625 ILCS 5/12-218.5 new) |
| 19 | | Sec. 12-218.5. Optional lighting on motorcycles. |
| 20 | | (a) A motorcycle may be equipped with 2 forward facing |
| 21 | | electric turn signals mounted on or near the handlebar grip |
| 22 | | assembly, or on the front fork assembly, or front fender |
| 23 | | shroud. The lamps shall be mounted on the same level and as |
| 24 | | widely spaced laterally as practicable, and when signaling, |
| 25 | | shall emit a white or amber light. |
|
| | 10300SB0896sam001 | - 3 - | LRB103 03368 MXP 59613 a |
|
|
| 1 | | (b) A motorcycle may be equipped with 2 forward facing |
| 2 | | electric driving lights which display a steady-on white or |
| 3 | | amber light. These lights may be in addition to but not in lieu |
| 4 | | of the required lamps on motorcycles under Section 11-201 and |
| 5 | | may be used either when the provisions of Section 11-201 are |
| 6 | | required or not required. The driving lights under this |
| 7 | | subsection (b) may by the same lamp housing specified under |
| 8 | | subsection (a) which shall only be actuated to a flashing |
| 9 | | signal to comply with the requirements of Section 11-208.".
|