SB1248 95TH GENERAL ASSEMBLY

LRB095 07862 BDD 28023 b

95TH GENERAL ASSEMBLY
State of Illinois
2007 and 2008
SB1248

Introduced 2/9/2007, by Sen. Terry Link - Martin A. Sandoval

SYNOPSIS AS INTRODUCED:

35 ILCS 105/3-50	from Ch. 120, par. 439.3-50
35 ILCS 120/2-45	from Ch. 120, par. 441-45

Amends the Use Tax Act and the Retailers' Occupation Tax Act. Provides that the manufacturing and assembling machinery and equipment exemption also includes production related tangible personal property. Defines "production related tangible personal property" as all tangible personal property used or consumed by the purchaser in a manufacturing facility in which a manufacturing process takes place, including tangible personal property purchased for incorporation into real estate within a manufacturing facility and including, but not limited to, tangible personal property used or consumed in activities such as research and development, preproduction material handling, receiving, quality control, inventory control, storage, staging, and packaging for shipping and transportation purposes. Provides that "production related tangible personal property" does not include (i) tangible personal property used, within or without a manufacturing facility, in sales, purchasing, accounting, fiscal management, marketing, personnel recruitment or selection, or landscaping or (ii) tangible personal property required to be titled or registered with a department, agency, or unit of federal, state, or local government. Effective immediately.

FISCAL NOTE ACT MAY APPLY

A BILL FOR

AN ACT concerning revenue.

Be it enacted by the People of the State of Illinois, represented in the General Assembly:

Section 5. The Use Tax Act is amended by changing Section 3-50 as follows:

(35 ILCS 105/3-50) (from Ch. 120, par. 439.3-50)

Sec. 3-50. Manufacturing and assembly exemption. The manufacturing and assembling machinery and equipment exemption includes machinery and equipment that replaces machinery and equipment in an existing manufacturing facility as well as machinery and equipment that are for use in an expanded or new manufacturing facility. The machinery and equipment exemption also includes machinery and equipment used in the general maintenance or repair of exempt machinery and equipment or for in-house manufacture of exempt machinery and equipment. The manufacturing and assembling machinery and equipment exemption also includes production related tangible personal property. For the purposes of this exemption, terms have the following meanings:

(1) "Manufacturing process" means the production of an article of tangible personal property, whether the article is a finished product or an article for use in the process of manufacturing or assembling a different article of tangible personal property, by a procedure commonly regarded as manufacturing, processing, fabricating, or refining that changes some existing material into a material with a different form, use, or name. In relation to a recognized integrated business composed of a series of operations that collectively constitute manufacturing, or individually constitute manufacturing operations, the manufacturing process commences with the first operation or stage of production in the series and does not end until the completion of the final product in the last operation or stage of production in the series. For purposes of this exemption, photoprocessing is a manufacturing process of tangible personal property for wholesale or retail sale.

(2) "Assembling process" means the production of an article of tangible personal property, whether the article is a finished product or an article for use in the process of manufacturing or assembling a different article of tangible personal property, by the combination of existing materials in a manner commonly regarded as assembling that results in an article or material of a different form, use, or name.

(3) "Machinery" means major mechanical machines or major components of those machines contributing to a manufacturing or assembling process.

(4) "Equipment" includes an independent device or tool separate from machinery but essential to an integrated manufacturing or assembly process; including computers used primarily in a manufacturer's computer assisted design, computer assisted manufacturing (CAD/CAM) system; any subunit or assembly comprising a component of any machinery or auxiliary, adjunct, or attachment parts of machinery, such as tools, dies, jigs, fixtures, patterns, and molds; and any parts that require periodic replacement in the course of normal operation; but does not include hand tools. Equipment includes chemicals or chemicals acting as catalysts but only if the chemicals or chemicals acting as catalysts effect a direct and immediate change upon a product being manufactured or assembled for wholesale or retail sale or lease.

(5) "Production related tangible personal property" means all tangible personal property used or consumed by the purchaser in a manufacturing facility in which a manufacturing process, as defined in this Section, takes place, including tangible personal property purchased for incorporation into real estate within a manufacturing facility and including, but not limited to, tangible personal property used or consumed in activities such as research and development, preproduction material handling, receiving, quality control, inventory control, storage, staging, and packaging for shipping and transportation purposes. "Production related tangible personal property" does not include (i) tangible personal property used, within or without a manufacturing facility, in sales, purchasing, accounting, fiscal management, marketing, personnel recruitment or selection, or landscaping or (ii) tangible personal property required to be titled or registered with a department, agency, or unit of federal, state, or local government.

The manufacturing and assembling machinery and equipment exemption includes the sale of materials to a purchaser who produces exempted types of machinery, equipment, or tools and who rents or leases that machinery, equipment, or tools to a manufacturer of tangible personal property. This exemption also includes the sale of materials to a purchaser who manufactures those materials into an exempted type of machinery, equipment, or tools that the purchaser uses himself or herself in the manufacturing of tangible personal property. This exemption includes the sale of exempted types of machinery or equipment to a purchaser who is not the manufacturer, but who rents or leases the use of the property to a manufacturer. The purchaser of the machinery and equipment who has an active resale registration number shall furnish that number to the seller at the time of purchase. A user of the machinery, equipment, or tools without an active resale registration number shall prepare a certificate of exemption for each transaction stating facts establishing the exemption for that transaction, and that certificate shall be available to the Department for inspection or audit. The Department shall prescribe the form of the certificate. Informal rulings, opinions, or letters issued by the Department in response to an inquiry or request for an opinion from any person regarding the coverage and applicability of this exemption to specific devices shall be published, maintained as a public record, and made available for public inspection and copying. If the informal ruling, opinion, or letter contains trade secrets or other confidential information, where possible, the Department shall delete that information before publication. Whenever informal rulings, opinions, or letters contain a policy of general applicability, the Department shall formulate and adopt that policy as a rule in accordance with the Illinois Administrative Procedure Act.

(Source: P.A. 91-51, eff. 6-30-99; 92-484, eff. 8-23-01.)

Section 10. The Retailers' Occupation Tax Act is amended by changing Section 2-45 as follows:

(35 ILCS 120/2-45) (from Ch. 120, par. 441-45)

Sec. 2-45. Manufacturing and assembly exemption. The manufacturing and assembly machinery and equipment exemption includes machinery and equipment that replaces machinery and equipment in an existing manufacturing facility as well as machinery and equipment that are for use in an expanded or new manufacturing facility.

The machinery and equipment exemption also includes machinery and equipment used in the general maintenance or repair of exempt machinery and equipment or for in-house manufacture of exempt machinery and equipment. The manufacturing and assembling machinery and equipment exemption also includes production related tangible personal property. For the purposes of this exemption, terms have the following meanings:

(1) "Manufacturing process" means the production of an article of tangible personal property, whether the article is a finished product or an article for use in the process of manufacturing or assembling a different article of tangible personal property, by a procedure commonly regarded as manufacturing, processing, fabricating, or refining that changes some existing material or materials into a material with a different form, use, or name. In relation to a recognized integrated business composed of a series of operations that collectively constitute manufacturing, or individually constitute manufacturing operations, the manufacturing process commences with the first operation or stage of production in the series and does not end until the completion of the final product in the last operation or stage of production in the series. For purposes of this exemption, photoprocessing is a manufacturing process of tangible personal property for wholesale or retail sale.

(2) "Assembling process" means the production of an article of tangible personal property, whether the article is a finished product or an article for use in the process of manufacturing or assembling a different article of tangible personal property, by the combination of existing materials in a manner commonly regarded as assembling that results in a material of a different form, use, or name.

(3) "Machinery" means major mechanical machines or major components of those machines contributing to a manufacturing or assembling process.

(4) "Equipment" includes an independent device or tool separate from machinery but essential to an integrated manufacturing or assembly process; including computers used primarily in a manufacturer's computer assisted design, computer assisted manufacturing (CAD/CAM) system; any subunit or assembly comprising a component of any machinery or auxiliary, adjunct, or attachment parts of machinery, such as tools, dies, jigs, fixtures, patterns, and molds; and any parts that require periodic replacement in the course of normal operation; but does not include hand tools. Equipment includes chemicals or chemicals acting as catalysts but only if the chemicals or chemicals acting as catalysts effect a direct and immediate change upon a product being manufactured or assembled for wholesale or retail sale or lease.

(5) "Production related tangible personal property" means all tangible personal property used or consumed by the purchaser in a manufacturing facility in which a manufacturing process, as defined in this Section, takes place, including tangible personal property purchased for incorporation into real estate within a manufacturing facility and including, but not limited to, tangible personal property used or consumed in activities such as research and development, preproduction material handling, receiving, quality control, inventory control, storage, staging, and packaging for shipping and transportation purposes. "Production related tangible personal property" does not include (i) tangible personal property used, within or without a manufacturing facility, in sales, purchasing, accounting, fiscal management, marketing, personnel recruitment or selection, or landscaping or (ii) tangible personal property required to be titled or registered with a department, agency, or unit of federal, state, or local government.

The manufacturing and assembling machinery and equipment exemption includes the sale of materials to a purchaser who produces exempted types of machinery, equipment, or tools and who rents or leases that machinery, equipment, or tools to a manufacturer of tangible personal property. This exemption also includes the sale of materials to a purchaser who manufactures those materials into an exempted type of machinery, equipment, or tools that the purchaser uses himself or herself in the manufacturing of tangible personal property. The purchaser of the machinery and equipment who has an active resale registration number shall furnish that number to the seller at the time of purchase. A purchaser of the machinery, equipment, and tools without an active resale registration number shall furnish to the seller a certificate of exemption for each transaction stating facts establishing the exemption for that transaction, and that certificate shall be available to the Department for inspection or audit. Informal rulings, opinions, or letters issued by the Department in response to an inquiry or request for an opinion from any person regarding the coverage and applicability of this exemption to specific devices shall be published, maintained as a public record, and made available for public inspection and copying. If the informal ruling, opinion, or letter contains trade secrets or other confidential information, where possible, the Department shall delete that information before publication. Whenever informal rulings, opinions, or letters contain a policy of general applicability, the Department shall formulate and adopt that policy as a rule in accordance with the Illinois Administrative Procedure Act.

(Source: P.A. 91-51, eff. 6-30-99; 92-484, eff. 8-23-01.)

Section 99. Effective date. This Act takes effect upon becoming law.