Full Text of HB5547 95th General Assembly
HB5547 95TH GENERAL ASSEMBLY
|
|
|
95TH GENERAL ASSEMBLY
State of Illinois
2007 and 2008 HB5547
Introduced , by Rep. Joseph M. Lyons SYNOPSIS AS INTRODUCED: |
|
30 ILCS 565/3 |
from Ch. 48, par. 1803 |
30 ILCS 565/4 |
from Ch. 48, par. 1804 |
|
Amends the Steel Products Procurement Act. Makes changes to the definition of "steel products" and defines the term "manufactured". Adds additional exceptions to the requirement that steel products used under certain contracts must be manufactured in the United States. Effective immediately.
|
| |
|
|
| FISCAL NOTE ACT MAY APPLY | |
|
|
A BILL FOR
|
|
|
|
|
HB5547 |
|
LRB095 16252 HLH 42271 b |
|
| 1 |
| AN ACT concerning finance.
| 2 |
| Be it enacted by the People of the State of Illinois,
| 3 |
| represented in the General Assembly:
| 4 |
| Section 5. The Steel Products Procurement Act is amended by | 5 |
| changing Sections 3 and 4 as follows:
| 6 |
| (30 ILCS 565/3) (from Ch. 48, par. 1803)
| 7 |
| Sec. 3. For the purposes of this Act, the following words | 8 |
| have the
meanings ascribed to them in this Section unless the | 9 |
| context clearly requires otherwise.
| 10 |
| (a) "Public agency" means the State of Illinois, its | 11 |
| departments, agencies,
boards, commissions and institutions, | 12 |
| and all units of local government,
including school districts.
| 13 |
| (b) "United States" means the United States and any place | 14 |
| subject to the
jurisdiction thereof.
| 15 |
| (c) "Steel products" means final, usable building | 16 |
| materials manufactured of steel, including, but not limited to, | 17 |
| structural steel, structural shapes, pipe, reinforcing bars, | 18 |
| duct work, sheet metal, and building panels. "Steel products" | 19 |
| also includes machinery and equipment containing steel | 20 |
| components, where such steel components make up 75% or more of | 21 |
| the final product by weight products rolled, formed, shaped, | 22 |
| drawn,
extruded, forged, cast, fabricated, or otherwise | 23 |
| similarly processed, or
processed by a combination of two or |
|
|
|
HB5547 |
- 2 - |
LRB095 16252 HLH 42271 b |
|
| 1 |
| more such operations, from steel made
in the United States by | 2 |
| the open hearth, basic oxygen, electric furnace,
Bessemer or | 3 |
| other steel making process .
| 4 |
| (d) "Manufactured" means rolled, formed, shaped, drawn,
| 5 |
| extruded, forged, cast, or otherwise similarly processed, or
| 6 |
| processed by a combination of two or more such operations, from | 7 |
| steel made by the open hearth, basic oxygen, electric furnace,
| 8 |
| Bessemer or other steel making process. | 9 |
| (Source: P.A. 83-1030.)
| 10 |
| (30 ILCS 565/4) (from Ch. 48, par. 1804)
| 11 |
| Sec. 4. Each contract for the construction, | 12 |
| reconstruction, alteration,
repair, improvement or maintenance | 13 |
| of public works made by a public agency
shall contain a | 14 |
| provision that steel products used or supplied and left in | 15 |
| place in the performance
of that contract or any subcontract | 16 |
| thereto shall be manufactured or produced
in the United States.
| 17 |
| The provisions of this Section shall not apply:
| 18 |
| (1) Where the contract involves an expenditure of less than | 19 |
| $5,000 $500 .
| 20 |
| (2) Where the executive head of the public agency certifies | 21 |
| in writing
that (a) the specified products are not manufactured | 22 |
| or produced in the
United States in sufficient quantities to | 23 |
| meet the agency's requirements
or cannot be manufactured or | 24 |
| produced in the United States within the necessary
time in | 25 |
| sufficient quantities to meet the agency's requirements, or (b)
|
|
|
|
HB5547 |
- 3 - |
LRB095 16252 HLH 42271 b |
|
| 1 |
| obtaining the specified products, manufactured or produced in | 2 |
| the United
States would increase the cost of the contract by | 3 |
| more than 10%.
| 4 |
| (3) When its application is not in the public interest.
| 5 |
| (4) When the specified products are manufactured by 2 or | 6 |
| fewer producers in the United States, unless referring to | 7 |
| structural steel. | 8 |
| (5) To the aggregate cost of domestically available, but | 9 |
| foreign produced steel products of up to 0.5% of the total | 10 |
| contract value, to a maximum of $50,000 on any single contract. | 11 |
| (6) To finishing and assembly operations. | 12 |
| (7) To 10%, by weight of steel, of machinery and equipment | 13 |
| containing steel components as defined by subsection (c) of | 14 |
| Section 3 of this Act. | 15 |
| (Source: P.A. 83-1030.)
| 16 |
| Section 99. Effective date. This Act takes effect upon | 17 |
| becoming law.
|
|