Full Text of SB2611 100th General Assembly
SB2611 100TH GENERAL ASSEMBLY |
| | 100TH GENERAL ASSEMBLY
State of Illinois
2017 and 2018 SB2611 Introduced 2/7/2018, by Sen. Chapin Rose SYNOPSIS AS INTRODUCED: |
| 105 ILCS 5/10-20.67 new | | 105 ILCS 5/34-18.60 new | |
|
Amends the School Code. Defines "temporary door locking device". Provides that, upon submitting an application to the regional superintendent of schools, a school district may obtain a temporary door locking device for use on a school building. Specifies application requirements. Provides that an approved temporary door locking device shall be used only (i) by a staff member of a school district trained under the provision, (ii) during an emergency situation that threatens the health and safety of students and staff members or during an active shooter drill, and (iii) when law enforcement officials and the local fire department have been notified prior to use of the device. Provides that the device shall be engaged for a finite period of time in accordance with the school district's school safety plan adopted under the School Safety Drill Act. Provides that a school district with an approved temporary door locking device shall conduct an in-service training program for staff members on the proper use of the device.
|
| |
| | | FISCAL NOTE ACT MAY APPLY | |
| | A BILL FOR |
|
| | | SB2611 | | LRB100 17156 AXK 32311 b |
|
| 1 | | AN ACT concerning education.
| 2 | | Be it enacted by the People of the State of Illinois,
| 3 | | represented in the General Assembly:
| 4 | | Section 5. The School Code is amended by adding Sections | 5 | | 10-20.67 and 34-18.60 as follows: | 6 | | (105 ILCS 5/10-20.67 new) | 7 | | Sec. 10-20.67. Temporary door locking device. | 8 | | (a) In this Section, "temporary door locking device" means | 9 | | an assembly of parts intended for use by a trained school staff | 10 | | member in a school building for the purpose of preventing both | 11 | | ingress and egress through a door of the building. | 12 | | (b) Upon submitting an application to the regional | 13 | | superintendent of schools in a form and manner prescribed by | 14 | | the regional superintendent, a school district may obtain a | 15 | | temporary door locking device for use on a school building. The | 16 | | application shall include, but is not limited to: | 17 | | (1) evidence of a properly adopted and filed school | 18 | | safety plan under the School Safety Drill Act; | 19 | | (2) a statement confirming that law enforcement | 20 | | officials and the local fire department have been notified | 21 | | about the temporary door locking device; | 22 | | (3) a description of the temporary door locking device | 23 | | the school district proposes to acquire; and |
| | | SB2611 | - 2 - | LRB100 17156 AXK 32311 b |
|
| 1 | | (4) a statement confirming that any bolts, stops, | 2 | | brackets, or pins employed by the temporary door locking | 3 | | device do not affect the fire rating of a fire door | 4 | | assembly. | 5 | | Upon receiving an application under this subsection (b), a | 6 | | regional superintendent shall evaluate the school district's | 7 | | proposed temporary door locking device to ensure compliance | 8 | | with subsection (c) of this Section. The regional | 9 | | superintendent may consult a local fire department when | 10 | | reviewing the application if the consultation would not result | 11 | | in the undue delay of approving or disapproving the | 12 | | application. | 13 | | If a regional superintendent approves an application under | 14 | | this subsection (b), the approval shall be noted on the school | 15 | | building's certificate of occupancy. If a regional | 16 | | superintendent disapproves an application, he or she shall | 17 | | notify the school district of the decision and the reasons for | 18 | | the decision. | 19 | | (c) An approved temporary door locking device shall be used | 20 | | only (i) by a staff member of a school district trained under | 21 | | subsection (d) of this Section, (ii) during an emergency | 22 | | situation that threatens the health and safety of students and | 23 | | staff members or during an active shooter drill, and (iii) when | 24 | | law enforcement officials and the local fire department have | 25 | | been notified prior to use of the device. The device shall be | 26 | | engaged for a finite period of time in accordance with the |
| | | SB2611 | - 3 - | LRB100 17156 AXK 32311 b |
|
| 1 | | school district's school safety plan adopted under the School | 2 | | Safety Drill Act. The device may not be permanently mounted to | 3 | | a door; however, assembly items such as bolts, stops, brackets, | 4 | | or pins that do not prevent ingress and egress through the door | 5 | | may be permanently mounted if they do not affect the fire | 6 | | rating of a fire door assembly. After it is engaged, the | 7 | | removal of the device must not require more than one operation; | 8 | | however, 2 operations may be permitted when the school building | 9 | | is equipped with an automatic sprinkler system. | 10 | | (d) A school district with an approved temporary door | 11 | | locking device shall conduct an in-service training program for | 12 | | staff members on the proper use of the device. The school | 13 | | district shall keep a file verifying the staff members who have | 14 | | completed the program and shall provide the file to the local | 15 | | fire department upon request. | 16 | | (105 ILCS 5/34-18.60 new) | 17 | | Sec. 34-18.60. Temporary door locking device. | 18 | | (a) In this Section, "temporary door locking device" means | 19 | | an assembly of parts intended for use by a trained school staff | 20 | | member in a school building for the purpose of preventing both | 21 | | ingress and egress through a door of the building. | 22 | | (b) Upon submitting an application to the State Board of | 23 | | Education in a form and manner prescribed by the State Board, | 24 | | the school district may obtain a temporary door locking device | 25 | | for use on a school building. The application shall include, |
| | | SB2611 | - 4 - | LRB100 17156 AXK 32311 b |
|
| 1 | | but is not limited to: | 2 | | (1) evidence of a properly adopted and filed school | 3 | | safety plan under the School Safety Drill Act; | 4 | | (2) a statement confirming that law enforcement | 5 | | officials and the local fire department have been notified | 6 | | about the temporary door locking device; | 7 | | (3) a description of the temporary door locking device | 8 | | the school district proposes to acquire; and | 9 | | (4) a statement confirming that any bolts, stops, | 10 | | brackets, or pins employed by the temporary door locking | 11 | | device do not affect the fire rating of a fire door | 12 | | assembly. | 13 | | Upon receiving an application under this subsection (b), | 14 | | the State Board shall evaluate the school district's proposed | 15 | | temporary door locking device to ensure compliance with | 16 | | subsection (c) of this Section. The State Board may consult the | 17 | | local fire department when reviewing the application if the | 18 | | consultation would not result in the undue delay of approving | 19 | | or disapproving the application. | 20 | | If the State Board approves an application under this | 21 | | subsection (b), the approval shall be noted on the school | 22 | | building's certificate of occupancy. If the State Board | 23 | | disapproves an application, he or she shall notify the school | 24 | | district of the decision and the reasons for the decision. | 25 | | (c) An approved temporary door locking device shall be used | 26 | | only (i) by a staff member of the school district trained under |
| | | SB2611 | - 5 - | LRB100 17156 AXK 32311 b |
|
| 1 | | subsection (d) of this Section, (ii) during an emergency | 2 | | situation that threatens the health and safety of students and | 3 | | staff members or during an active shooter drill, and (iii) when | 4 | | law enforcement officials and the local fire department have | 5 | | been notified prior to use of the device. The device shall be | 6 | | engaged for a finite period of time in accordance with the | 7 | | school district's school safety plan adopted under the School | 8 | | Safety Drill Act. The device may not be permanently mounted to | 9 | | a door; however, assembly items such as bolts, stops, brackets, | 10 | | or pins that do not prevent ingress and egress through the door | 11 | | may be permanently mounted if they do not affect the fire | 12 | | rating of a fire door assembly. After it is engaged, the | 13 | | removal of the device must not require more than one operation; | 14 | | however, 2 operations may be permitted when the school building | 15 | | is equipped with an automatic sprinkler system. | 16 | | (d) If the school district obtains an approved temporary | 17 | | door locking device, it shall conduct an in-service training | 18 | | program for staff members on the proper use of the device. The | 19 | | school district shall keep a file verifying the staff members | 20 | | who have completed the program and shall provide the file to | 21 | | the local fire department upon request.
|
|