Full Text of SB1371 101st General Assembly
SB1371sam001 101ST GENERAL ASSEMBLY | Sen. Chapin Rose Filed: 4/3/2019
| | 10100SB1371sam001 | | LRB101 09338 AXK 58966 a |
|
| 1 | | AMENDMENT TO SENATE BILL 1371
| 2 | | AMENDMENT NO. ______. Amend Senate Bill 1371 by replacing | 3 | | everything after the enacting clause with the following:
| 4 | | "Section 5. The School Code is amended by adding Sections | 5 | | 10-20.69 and 34-18.61 as follows: | 6 | | (105 ILCS 5/10-20.69 new) | 7 | | Sec. 10-20.69. Door security locking means. | 8 | | (a) In this Section, "door security locking means" means a | 9 | | door locking means intended for use by a trained school | 10 | | district employee in a school building for the purpose of | 11 | | preventing both ingress and egress through a door of the | 12 | | building. | 13 | | (b) A school district may install a door security locking | 14 | | means on a door of a school building to prevent unwanted entry | 15 | | through the door if all of the following requirements are met: | 16 | | (1) The door security locking means can be engaged |
| | | 10100SB1371sam001 | - 2 - | LRB101 09338 AXK 58966 a |
|
| 1 | | without opening the door. | 2 | | (2) The unlocking and unlatching of the door security | 3 | | locking means from the occupied side of the door can be | 4 | | accomplished without the use of a key or tool. | 5 | | (3) Locks, if remotely engaged, can be unlocked from | 6 | | the occupied side. | 7 | | (4) The door security locking means is capable of being | 8 | | disengaged from the outside by school district employees, | 9 | | and school district employees may use a key or other | 10 | | credentials to unlock the door from the outside. | 11 | | (5) The door security locking means does not modify the | 12 | | door-closing hardware, panic hardware, or fire exit | 13 | | hardware. | 14 | | (6) Any bolts, stops, brackets, or pins employed by the | 15 | | door security locking means do not affect the fire rating | 16 | | of a fire door assembly. | 17 | | (7) School district employees are trained in the | 18 | | engagement and release of the door security locking means, | 19 | | from within and outside the room, as part of the emergency | 20 | | response plan. | 21 | | (8) For doors installed before July 1, 2019 only, the | 22 | | unlocking and unlatching of a door security locking means | 23 | | requires no more than 2 releasing operations. For doors | 24 | | installed on or after July 1, 2019, the unlocking and | 25 | | unlatching of a door security locking means requires no | 26 | | more than one releasing operation. If doors installed |
| | | 10100SB1371sam001 | - 3 - | LRB101 09338 AXK 58966 a |
|
| 1 | | before July 1, 2019 are replaced on or after July 1, 2019, | 2 | | the unlocking and unlatching of a door security locking | 3 | | means on the replacement door requires no more than one | 4 | | releasing operation. | 5 | | (9) The door security locking means is no more than 48 | 6 | | inches above the finished floor. | 7 | | (c) A school district must include the location of any door | 8 | | security locking means and must address the use of the locking | 9 | | and unlocking means from within and outside the room in its | 10 | | filed school safety plan under the School Safety Drill Act. | 11 | | Local law enforcement officials and the local fire department | 12 | | must be notified of the location of any door security locking | 13 | | means and how to disengage it. Any specific tool needed to | 14 | | disengage the door security locking means from the outside of | 15 | | the room must, upon request, be made available to local law | 16 | | enforcement officials and the local fire department. | 17 | | (d) A door security locking means may be used only (i) by a | 18 | | school district employee trained under subsection (e), (ii) | 19 | | during an emergency that threatens the health and safety of | 20 | | students and employees or during an active shooter drill, and | 21 | | (iii) when local law enforcement officials and the local fire | 22 | | department have been notified of its installation prior to its | 23 | | use. The door security locking means must be engaged for a | 24 | | finite period of time in accordance with the school district's | 25 | | school safety plan adopted under the School Safety Drill Act. | 26 | | (e) A school district that has installed a door security |
| | | 10100SB1371sam001 | - 4 - | LRB101 09338 AXK 58966 a |
|
| 1 | | locking means shall conduct an in-service training program for | 2 | | school district employees on the proper use of the door | 3 | | security locking means. The school district shall keep a file | 4 | | verifying the employees who have completed the program and | 5 | | must, upon request, provide the file to its regional office of | 6 | | education and the local fire department and local law | 7 | | enforcement agency. | 8 | | (f) A door security locking means that requires 2 releasing | 9 | | operations must be discontinued from use when the door is | 10 | | replaced or is a part of new construction. Replacement and new | 11 | | construction door hardware must include mortise locks, | 12 | | compliant with the applicable building code, and must be | 13 | | lockable from the occupied side without opening the door. | 14 | | However, mortise locks are not required if panic hardware or | 15 | | fire exit hardware is required. | 16 | | (105 ILCS 5/34-18.61 new) | 17 | | Sec. 34-18.61. Door security locking means. | 18 | | (a) In this Section, "door security locking means" means a | 19 | | door locking means intended for use by a trained school | 20 | | district employee in a school building for the purpose of | 21 | | preventing both ingress and egress through a door of the | 22 | | building. | 23 | | (b) The school district may install a door security locking | 24 | | means on a door of a school building to prevent unwanted entry | 25 | | through the door if all of the following requirements are met: |
| | | 10100SB1371sam001 | - 5 - | LRB101 09338 AXK 58966 a |
|
| 1 | | (1) The door security locking means can be engaged | 2 | | without opening the door. | 3 | | (2) The unlocking and unlatching of the door security | 4 | | locking means from the occupied side of the door can be | 5 | | accomplished without the use of a key or tool. | 6 | | (3) Locks, if remotely engaged, can be unlocked from | 7 | | the occupied side. | 8 | | (4) The door security locking means is capable of being | 9 | | disengaged from the outside by school district employees, | 10 | | and school district employees may use a key or other | 11 | | credentials to unlock the door from the outside. | 12 | | (5) The door security locking means does not modify the | 13 | | door-closing hardware, panic hardware, or fire exit | 14 | | hardware. | 15 | | (6) Any bolts, stops, brackets, or pins employed by the | 16 | | door security locking means do not affect the fire rating | 17 | | of a fire door assembly. | 18 | | (7) School district employees are trained in the | 19 | | engagement and release of the door security locking means, | 20 | | from within and outside the room, as part of the emergency | 21 | | response plan. | 22 | | (8) For doors installed before July 1, 2019 only, the | 23 | | unlocking and unlatching of a door security locking means | 24 | | requires no more than 2 releasing operations. For doors | 25 | | installed on or after July 1, 2019, the unlocking and | 26 | | unlatching of a door security locking means requires no |
| | | 10100SB1371sam001 | - 6 - | LRB101 09338 AXK 58966 a |
|
| 1 | | more than one releasing operation. If doors installed | 2 | | before July 1, 2019 are replaced on or after July 1, 2019, | 3 | | the unlocking and unlatching of a door security locking | 4 | | means on the replacement door requires no more than one | 5 | | releasing operation. | 6 | | (9) The door security locking means is no more than 48 | 7 | | inches above the finished floor. | 8 | | (c) The school district must include the location of any | 9 | | door security locking means and must address the use of the | 10 | | locking and unlocking means from within and outside the room in | 11 | | its filed school safety plan under the School Safety Drill Act. | 12 | | Local law enforcement officials and the local fire department | 13 | | must be notified of the location of any door security locking | 14 | | means and how to disengage it. Any specific tool needed to | 15 | | disengage the door security locking means from the outside of | 16 | | the room must, upon request, be made available to local law | 17 | | enforcement officials and the local fire department. | 18 | | (d) A door security locking means may be used only (i) by a | 19 | | school district employee trained under subsection (e), (ii) | 20 | | during an emergency that threatens the health and safety of | 21 | | students and employees or during an active shooter drill, and | 22 | | (iii) when local law enforcement officials and the local fire | 23 | | department have been notified of its installation prior to its | 24 | | use. The door security locking means must be engaged for a | 25 | | finite period of time in accordance with the school district's | 26 | | school safety plan adopted under the School Safety Drill Act. |
| | | 10100SB1371sam001 | - 7 - | LRB101 09338 AXK 58966 a |
|
| 1 | | (e) If the school district installs a door security locking | 2 | | means, it must conduct an in-service training program for | 3 | | school district employees on the proper use of the door | 4 | | security locking means. The school district shall keep a file | 5 | | verifying the employees who have completed the program and | 6 | | must, upon request, provide the file to the local fire | 7 | | department and local law enforcement agency. | 8 | | (f) A door security locking means that requires 2 releasing | 9 | | operations must be discontinued from use when the door is | 10 | | replaced or is a part of new construction. Replacement and new | 11 | | construction door hardware must include mortise locks, | 12 | | compliant with the applicable building code, and must be | 13 | | lockable from the occupied side without opening the door. | 14 | | However, mortise locks are not required if panic hardware or | 15 | | fire exit hardware is required.
| 16 | | Section 99. Effective date. This Act takes effect July 1, | 17 | | 2019.".
|
|