(220 ILCS 50/2.7)
Sec. 2.7.
Tolerance zone.
"Tolerance zone" means the approximate location
of underground
utility facilities
or CATS facilities defined as a strip of land at least 3 feet wide, but not
wider than the width of
the underground facility or CATS facility plus 1-1/2 feet on either side of
such facility based upon the markings made by the owner or operator of the
facility.
Excavation within the tolerance zone requires extra care and precaution
including, but not
limited to, as set forth in Section 4.
(Source: P.A. 92-179, eff. 7-1-02.)
|