Illinois General Assembly

  Bills & Resolutions  
  Compiled Statutes  
  Public Acts  
  Legislative Reports  
  IL Constitution  
  Legislative Guide  
  Legislative Glossary  

 Search By Number
 (example: HB0001)
Search Tips

Search By Keyword

Illinois Compiled Statutes

 ILCS Listing   Public Acts  Search   Guide   Disclaimer

Information maintained by the Legislative Reference Bureau
Updating the database of the Illinois Compiled Statutes (ILCS) is an ongoing process. Recent laws may not yet be included in the ILCS database, but they are found on this site as Public Acts soon after they become law. For information concerning the relationship between statutes and Public Acts, refer to the Guide.

Because the statute database is maintained primarily for legislative drafting purposes, statutory changes are sometimes included in the statute database before they take effect. If the source note at the end of a Section of the statutes includes a Public Act that has not yet taken effect, the version of the law that is currently in effect may have already been removed from the database and you should refer to that Public Act to see the changes made to the current law.

225 ILCS 470/42

    (225 ILCS 470/42) (from Ch. 147, par. 142)
    (Text of Section before amendment by P.A. 102-218)
    Sec. 42. Seal placed on weighing or measuring device; breaking for service; resealing. A seal placed on any weighing or measuring device by the Director may be broken for the purpose of calibration, adjustment, or repair, but only by a serviceperson or special sealer registered by the Director or by a special sealer. After servicing, the serviceperson must reseal using the number on the seal as assigned by the Director, and shall be responsible for the unit after it has been resealed. Written notice advising the Director within 5 days as to the unit on which the seal was broken and resealed must be submitted so that a recheck may be made by the Department.
(Source: P.A. 88-600, eff. 9-1-94.)
 
    (Text of Section after amendment by P.A. 102-218)
    Sec. 42. Placing into service. All weighing or measuring devices must be placed into service and sealed before they are first used in trade by a serviceperson, service agency, or special sealer registered by the Director or by an inspector.
(Source: P.A. 102-218, eff. 1-1-22.)