Illinois General Assembly

  Bills & Resolutions  
  Compiled Statutes  
  Public Acts  
  Legislative Reports  
  IL Constitution  
  Legislative Guide  
  Legislative Glossary  

 Search By Number
 (example: HB0001)
Search Tips

Search By Keyword

Illinois Compiled Statutes

 ILCS Listing   Public Acts  Search   Guide   Disclaimer

Information maintained by the Legislative Reference Bureau
Updating the database of the Illinois Compiled Statutes (ILCS) is an ongoing process. Recent laws may not yet be included in the ILCS database, but they are found on this site as Public Acts soon after they become law. For information concerning the relationship between statutes and Public Acts, refer to the Guide.

Because the statute database is maintained primarily for legislative drafting purposes, statutory changes are sometimes included in the statute database before they take effect. If the source note at the end of a Section of the statutes includes a Public Act that has not yet taken effect, the version of the law that is currently in effect may have already been removed from the database and you should refer to that Public Act to see the changes made to the current law.

225 ILCS 732/1-98

    (225 ILCS 732/1-98)
    Sec. 1-98. Hydraulic fracturing completion reporting.
    (a) For the purposes of this Section, "hydraulic fracturing operations" means all stages of a stimulation treatment of a horizontal well as defined by this Act by the pressurized application of more than 80,000 gallons but less than 300,001 gallons of hydraulic fracturing fluid and proppant to initiate or propagate fractures in a geologic formation to enhance extraction or production of oil or gas.
    (b) Within 60 calendar days after the conclusion of hydraulic fracturing operations, the operator shall file a hydraulic fracturing operations completion report with the Department. The hydraulic fracturing operations completion report shall contain the following information:
        (1) the name and location of the well;
        (2) the total and per-stage gallons of hydraulic
    
fracturing fluid used at the well;
        (3) depth of the wellbore (including both total
    
vertical depth and total measured depth);
        (4) length of horizontal wellbore;
        (5) the maximum surface treating pressure used;
        (6) the formation targeted;
        (7) the number of hydraulic fracturing stages; and
        (8) total perforated interval and individual
    
perforation intervals.
(Source: P.A. 98-22, eff. 6-17-13.)