Illinois Compiled Statutes
ILCS Listing
Public
Acts Search
Guide
Disclaimer
Information maintained by the Legislative
Reference Bureau
Updating the database of the Illinois Compiled Statutes (ILCS) is an ongoing process.
Recent laws may not yet be included in the ILCS database, but they are found on this site as Public
Acts soon after they become law. For information concerning the relationship between statutes and Public Acts, refer to the
Guide.
Because the statute database is maintained primarily for legislative drafting purposes,
statutory changes are sometimes included in the statute database before they take effect.
If the source note at the end of a Section of the statutes includes a Public Act that has
not yet taken effect, the version of the law that is currently in effect may have already
been removed from the database and you should refer to that Public Act to see the changes
made to the current law.
770 ILCS 105/2
(770 ILCS 105/2) (from Ch. 82, par. 352)
Sec. 2. Definitions. For purposes of this Act:
(A) The term "processor" means any individual or entity including, but
not limited to, a tool or die maker, who contracted with, or uses a tool,
die, mold, jig, fixture, form or pattern to manufacture, assemble, or
otherwise make a plastic or metal product or products for a customer.
(B) The term "customer" means any individual or entity who contracted with,
or caused a plastic or metal processor to use a tool, die, mold, jig,
fixture, form or pattern to manufacture, assemble, or otherwise make
plastic or metal components or products.
(C) The term "special tool" means a tool, die, mold, jig, fixture, form, pattern, or part used to manufacture, assemble, or otherwise make plastic or
metal components or products.
(D) The term "toolmaker" means a person including, but not limited to, a mold builder, model maker, patternmaker, molder, die maker, metal former, jig and fixture builder, die sinker, die caster, mold designer, mold programmer, die designer, die programmer, and mold or die engineer, that fabricates, cuts, casts, forms, or designs molds for the plastic industry or dies for the metal forming industry.
(Source: P.A. 94-615, eff. 1-1-06.)
|
|