Illinois General Assembly

  Bills & Resolutions  
  Compiled Statutes  
  Public Acts  
  Legislative Reports  
  IL Constitution  
  Legislative Guide  
  Legislative Glossary  

 Search By Number
 (example: HB0001)
Search Tips

Search By Keyword

Illinois Compiled Statutes

 ILCS Listing   Public Acts  Search   Guide   Disclaimer

Information maintained by the Legislative Reference Bureau
Updating the database of the Illinois Compiled Statutes (ILCS) is an ongoing process. Recent laws may not yet be included in the ILCS database, but they are found on this site as Public Acts soon after they become law. For information concerning the relationship between statutes and Public Acts, refer to the Guide.

Because the statute database is maintained primarily for legislative drafting purposes, statutory changes are sometimes included in the statute database before they take effect. If the source note at the end of a Section of the statutes includes a Public Act that has not yet taken effect, the version of the law that is currently in effect may have already been removed from the database and you should refer to that Public Act to see the changes made to the current law.

110 ILCS 151/10

    (110 ILCS 151/10)
    (Text of Section before amendment by P.A. 103-710)
    Sec. 10. Transfer of credits.
    (a) A public community college district shall accept up to 30 credit hours transferred from an institution that has been approved under Section 15 of this Act if a student has completed one of the following programs at that institution:
        (1) Medical Assisting.
        (2) Medical Coding.
        (3) Dental Assisting.
        (4) HVAC (Heating, Ventilation, and Air
    
Conditioning).
        (5) Welding.
        (6) Pharmacy Technician.
        (7) General Carpentry.
        (8) Interior Systems Carpentry.
        (9) Drywall.
        (10) Floor Covering.
        (11) Mill-cabinetry.
        (12) Millwright.
        (13) Insulation/Spray Foam.
        (14) Siding Installation.
        (15) Roofing.
        (16) Lathing.
        (17) Pile Driving.
        (18) Concrete Forming.
        (19) Scaffolding.
        (20) Residential Electrical Construction.
        (21) Commercial Electrical Construction.
        (22) Industrial Electrical Construction.
        (23) Renewable Energy Technology.
        (24) Energy Efficiency Concepts.
        (25) Electrical Manufacturing Sector.
        (26) Communications Systems.
        (27) Life Safety Systems.
        (28) Security Systems.
        (29) Sound Alarms.
        (30) Electrical Work Safety Practices.
        (31) Electrical Maintenance.
        (32) Fire Alarms.
        (33) Motor Controls.
        (34) Transformers.
        (35) Variable Speed Drive Systems.
        (36) Rigging.
The program must, at a minimum, be a 9-month program and use a credit-hour system.
    (b) The public community college district may accept the credits as direct equivalent credits or prior learning credits, as determined by the district and consistent with the accrediting standards and institutional and residency requirements of the Board, the Higher Learning Commission, other State and national accreditors, and State licensing bodies, as appropriate.
    (c) Any designation given by the Board of credit hour value for items (1) through (6) under subsection (a) shall be applied by the community college district as direct or elective credit toward an associate degree of applied science or its equivalent as determined by the community college district.
(Source: P.A. 100-569, eff. 12-15-17; 101-194, eff. 8-2-19.)
 
    (Text of Section after amendment by P.A. 103-710)
    Sec. 10. Transfer of credits.
    (a) A public community college district shall accept up to 30 credit hours transferred from an institution that has been approved under Section 15 of this Act if a student has completed one of the following programs at that institution:
        (1) Medical Assisting.
        (2) Medical Coding.
        (3) Dental Assisting.
        (4) HVAC (Heating, Ventilation, and Air Conditioning).
        (5) Welding.
        (6) Pharmacy Technician.
        (7) General Carpentry.
        (8) Interior Systems Carpentry.
        (9) Drywall.
        (10) Floor Covering.
        (11) Mill-cabinetry.
        (12) Millwright.
        (13) Insulation/Spray Foam.
        (14) Siding Installation.
        (15) Roofing.
        (16) Lathing.
        (17) Pile Driving.
        (18) Concrete Forming.
        (19) Scaffolding.
        (20) Residential Electrical Construction.
        (21) Commercial Electrical Construction.
        (22) Industrial Electrical Construction.
        (23) Renewable Energy Technology.
        (24) Energy Efficiency Concepts.
        (25) Electrical Manufacturing Sector.
        (26) Communications Systems.
        (27) Life Safety Systems.
        (28) Security Systems.
        (29) Sound Alarms.
        (30) Electrical Work Safety Practices.
        (31) Electrical Maintenance.
        (32) Fire Alarms.
        (33) Motor Controls.
        (34) Transformers.
        (35) Variable Speed Drive Systems.
        (36) Rigging.
        (37) Masonry.
The program must, at a minimum, be a 9-month program and use a credit-hour system.
    (b) The public community college district may accept the credits as direct equivalent credits or prior learning credits, as determined by the district and consistent with the accrediting standards and institutional and residency requirements of the Board, the Higher Learning Commission, other State and national accreditors, and State licensing bodies, as appropriate.
    (c) Any designation given by the Board of credit hour value for items (1) through (6) under subsection (a) shall be applied by the community college district as direct or elective credit toward an associate degree of applied science or its equivalent as determined by the community college district.
(Source: P.A. 103-710, eff. 1-1-25.)